3. Select V SIZE in EVR adjustment mode and adjust so that the top
4th line is just in view.
4. Confirm that the bottom 3rd line is in view and that the bottom 4th
line is out of view.
Fig.E12-2
7.3.15. WHITE BALANCE ADJUSTMENT
Purpose:
To set the standard white level for each color temperature.
Symptom of Misadjustment:
White becomes bluish or reddish.
Test Point :
TP50 (CRT C.B.A)
Adjustment :
FOCUS CONTROL (Flyback Transformer),
SCREEN CONTROL (Flyback Transformer),
SUB BRIGHT (EVR),
G DRIVE (EVR),
B DRIVE (EVR),
80
To Next Page
Loading...
