EasyManua.ls Logo

Panasonic QUINTRIX TX-86PW300A - Aspect Ratio Control Options; Automatic Aspect Ratio Selection; Manual Aspect Ratio Modes (16:9, 4:3); Zoom and Letterbox Aspect Modes

Panasonic QUINTRIX TX-86PW300A
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Aspect control
This button is used to move through the different aspect ratios. The aspect options are
Auto, 16:9, 14:9, JUST, 4:3, Zoom1, Zoom2 and Zoom3.
Auto
This option determines the best aspect ratio to use to fill your
screen. If Auto detects a widescreen signal it switches into the
appropriate 16:9 or 14:9 widescreen mode.
16:9
This option will display a true 16:9 (anamorphic) picture with no aspect distortion.
14:9
This option will display a 14:9 letterbox or 4:3 picture with no aspect distortion.
JUST
This option gives you a “best fit” option when showing 4:3 on wide screen. The
centre of the picture is not affected but there is some stretching at the edges.
4.3
This option will display a standard 4:3 picture with no aspect distortion.
Zoom 1
This option will display 16:9 letterbox or 4:3 pictures with no aspect distortion.
Zoom 2
This option will display 16:9 anamorphic letterbox pictures as a full screen display
with no aspect distortion.
Zoom 3
This option will display 21:9 letterbox pictures as a full screen display with no
aspect distortion.
Notes:
- If, in Auto mode, you experience problems with the screen display size when playing back widescreen
format recordings from your VCR then it is possible that the tracking control of your VCR requires
adjustment (your VCR instruction book will contain adjustment details).
- The widescreen aspect ratios of different films and programmes can vary. If these are wider than a
standard 16:9 aspect picture then a black band may be visible at the top and bottom of the screen.
4 : 3
4 : 3
14 : 9
16 : 9
Zoom 1
Zoom 2
Zoom 3

Table of Contents

Related product manuals