Panasonic QUINTRIX TX-86PW300A - Front Panel Button Functions; STR Button Functionality; F Button Functionality; Navigation Buttons (-;V, +;Λ)

9
Television Control Panel Buttons
BUTTON WHAT IT DOES
Please refer to drawing on Page 8 for location of Remote Control Buttons.
STR
This button is used to store tuning information and other function settings. It is
also used to start the menu demonstration.
F
The F button is used to select the on screen display functions. Press the button to
select the following functions sequentially.
Volume Geomagnetic
Contrast Tuning mode
Brightness Balance
Colour Treble
Sharpness Bass
NTSC-Tint
Notes:
NTSC-Tint: Only in AV Mode when receiving NTSC signals.
Tuning mode: Not displayed when in AV mode.
- / \/
This button is used to select the next lower programme number.
It is also used with the F button to adjust function settings.
+ / /\
This button is used to select the next higher programme number.
It is also used with the F button to adjust function settings.
TV / AV
This button is used to switch between the TV mode and the five AV modes.