12
TQBJ2029
Presetting stations
You can preset up to 5 stations into the
direct preset buttons.
The first five stations are preset with a
default frequency for your convenience.
1 While listening to a station, press
and hold the desired direct preset
button ([1] to [5]).
2 Press [ENTER] to preset the
station.
█ Listening to a preset station
Press the direct preset button ([1] to
[5]) to listen to the preset station.
Viewing available
information
This unit can show the text data
transmitted by the radio data system
(RDS) available in some areas, such as
programme service, programme type
and date.
Press [DISPLAY].
Note:
RDS may not be available if reception is
poor.
Bluetooth
®
You can connect and play an audio
device wirelessly through Bluetooth
®
.
Preparation
• Switch on the Bluetooth
®
feature of
the device and put the device near
the system.
• Read the operating instructions of
the device for details.
Pairing a device
Preparation
If this system is connected to a
Bluetooth
®
device, disconnect it
(Z“Disconnecting a device”).
1 Press and hold [ ].
If “Pairing” is shown, continue with
step 5.
2 Press [MENU].
3 Press [ TUNE/SELECT ] to
select “Pairing” and then press
[ENTER].
4 Press [ TUNE/SELECT ] to
select “Yes” and then press
[ENTER].
“Pairing” is shown.
To cancel, select “No”.
5 Select “RF-D20BT” or “RF-D20U”
from the Bluetooth
®
menu of the
device.
If prompted for a passkey, input
“0000” or “1234”.
The device connects with this
system automatically after pairing is
complete.
Note:
You can pair up to 8 devices with this
system. If a 9th device is paired, the
device that has not been used for the
longest time will be replaced.
D20BT_en_gn.fm Page 12 Monday, June 12, 2017 1:56 PM
To Next Page
Loading...
