Panasonic RR-DR60 - Main Circuit Details; Printed Circuit Board Layout; Replacement Parts List

3.1. MAIN CIRCUIT
3.2. MAIN CIRCUIT
3.3. MAIN CIRCUIT
4. Printed Circuit Board Diagram
4.1. MAIN P.C.B.
4.2. MAIN P.C.B.
5. Replacement Parts List
Note:
Important safety notice:
Components identified by mark have special characteristics important for safety.
Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used.
When replacing any of components, Be sure to use only manufacturer~s specified parts shown
in the parts list.
The parenthesized indications in the Remarks columns specify the areas. (Refer to the cover
page for area.)
Parts without these indications can be used for all areas.
Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-farads(pF) F=
Farads(F)
Resistance values are in ohms, unless specified otherwise, 1k=1,000(ohm), 1M=1,000k(ohm)
The "<IA>,<IB>,<IC>" marks in Remarks indicate language of instruction manual.
<IA>:English, Spanish, Japanese, Chinese, Arabic
<IB>:English, <IC>:Canadian French
3