Do you have a question about the Panasonic RS-808 and is the answer not in the manual?
Details catalog specifications for sales, including power, input/output, and physical dimensions.
Diagram identifying the location and function of all front and rear panel controls and indicators.
Table and diagrams outlining the procedures for safely disassembling the unit into major sections.
Procedure for measuring pressure roller force and head-up tape tension using specified tools.
Steps for adjusting head azimuth and performing rough head height adjustments for optimal playback.
Procedure for fine-tuning head height adjustment for minimum output on a specific test tape.
Methods for testing crosstalk, playback gain, level meter accuracy, and erase current.
Additional specifications for wow/flutter, tape speed, frequency response, S/N ratio, bias, and recording level.
Diagram and list showing the location and part numbers of internal electrical components.
Diagram and list showing the location and part numbers of external cabinet components and hardware.
Detailed schematic diagram illustrating the electronic circuitry and signal paths of the device.
Diagram showing internal wiring connections and lists of resistors, capacitors, and other electronic components.
Diagram of the unit's mechanical assembly with an accompanying list of all mechanical parts.
Details catalog specifications for sales, including power, input/output, and physical dimensions.
Diagram identifying the location and function of all front and rear panel controls and indicators.
Table and diagrams outlining the procedures for safely disassembling the unit into major sections.
Procedure for measuring pressure roller force and head-up tape tension using specified tools.
Steps for adjusting head azimuth and performing rough head height adjustments for optimal playback.
Procedure for fine-tuning head height adjustment for minimum output on a specific test tape.
Methods for testing crosstalk, playback gain, level meter accuracy, and erase current.
Additional specifications for wow/flutter, tape speed, frequency response, S/N ratio, bias, and recording level.
Diagram and list showing the location and part numbers of internal electrical components.
Diagram and list showing the location and part numbers of external cabinet components and hardware.
Detailed schematic diagram illustrating the electronic circuitry and signal paths of the device.
Diagram showing internal wiring connections and lists of resistors, capacitors, and other electronic components.
Diagram of the unit's mechanical assembly with an accompanying list of all mechanical parts.
| Track System | 4-track, 2-channel stereo |
|---|---|
| Type | Cassette Deck |
| Heads | 1 x record/playback, 1 x erase |
| Motor | DC servo |
| Outputs | Line |
| Inputs | Line |
| Frequency Response | 30 Hz - 16 kHz (Normal Tape) |
Loading...