Panasonic RX-FT560 - Disassembly Instructions; Removal of the Handle; Removal of the Front Cabinet; Removal of the Speakers

POWER SOURCE
B Battery Operation
1. O pen the Battery Compartment cover as shown in the
figure.
2. i nsert 8 UM-1 (Panasonic R20/LR20 or equivalent)
batteries into the Battery Compartment, making sure that
the proper polarities are maintained, and that the
batteries are installed in the specified numerical order.
Upper Shelf
Lower Shelf
©
©
tDarafcL)
©
©
3. R eplace the compartment cover.
«Battery life
When the batteries are weak, the tape speed will slow down,
the sound will become distorted, and the volume will
decrease.
Set the Function Selector to “TAP&ToFfI". Press the
Playback Button. When the sound is distorted, it is time to
replace all the batteries with new ones.
•Battery removal
Remove as shown in the figure below.
B AC Power Operation
Connect the included AC power cord to the AC Socket in the
unit and your household AC power outlet.
Upper Shelf
Lower Sh.«
To Prevent Possible Damage to This Unit
•Load new batteries with their polarities (© and ©)
aligned correctly.
•Do not apply heat to batteries, or internal short-
circuit may occur.
• If this unit is not to be used for a long period of time,
or used on AC power source, remove alt batteries
and store them in a cool and dry place.
•Remove spent batteries immediately.
• Do not use old and new batteries together. Also
never use an alkaline battery with a manganese
battery.
\ _
AC IN ~
AC power cord
AC power outlet
Note:
To operate on battery power, unplug the AC power
cord from the household AC power outlet and the AC
Socket on the unit.
- 3 -