The TV can only receive 1 to 3
channels of audio in the FM band.
In the following cases, reset (initialize) the memory
according to the procedure on the right. ¡ Nothing
happens when I press the button. ¡ I want to erase
the memory contents and set again.
Radio
process
In such a case
Please check here
Remote controller
Is
it a
hindrance !?
Isn't the radio an AM band?
Isn't the (,) of the dry cell reversed?
Is the CD upside down?
Use the characters (katakana, alphabets,
numbers, symbols) that can be displayed
on this machine.
Is the TV, video, BS tuner, etc.
turned on?
Keep the AM loop antenna away
from the main unit.
I can't operate the remote control.
19
The sound of the CD jumps.
-
Is the TV, video, BS tuner, etc.
turned on?
* To reset (initialize) the memory contents ÿ Unplug
the power plug from the outlet ÿ Hold down
[POWER 8] on the main unit and ÿ Insert the
power plug into the outlet
Replace with a standard CD.
Please use an MP3 disc.
-
-
6
Are you using a non-standard CD?
If you are creating a disc in multiple
sessions, did you end the session?
Try turning off the TV, video, BS
tuner, etc.
twenty three
Insert (,) correctly.
FM cannot be received well. There
is a lot of noise and distortion.
Try turning off the TV, video, BS
tuner, etc.
When "ÿÿÿÿÿÿÿÿÿÿÿÿ” is displayed on the
display, ÿ Release [POWER 8] * Reset
(initialize) the memory.
When I record a CD, the sound skips.
52
52
-
Is the transmission station far away?
Is the CD dirty?
-
Is the AM loop antenna connected?
Is the dry battery exhausted?
I can't play a specific part.
Did you adjust the whip antenna?
Is the antenna cord close to the
power cord?
I can't play it.
Is there a scratch or fingerprint on the
back of the CD?
The title is not displayed on the
MP3 disc.
The radio wave becomes weak when the
transmission station is far away or in a reinforcing
bar building. Try installing it in a place with good
conditions, such as near a window.
I can't receive TV broadcasts.
Was there a sudden temperature difference,
such as when you suddenly brought it from a
cold place to a warm place?
Wipe with a soft cloth.
Is the amount of data per session
small?
Replace with a new dry cell.
-
MP3 discs do not load properly.
AM cannot be received well. There
is a lot of noise.
Separate the antenna cord from the
power cord.
¡ High-speed recording can only be done after about 74 minutes.
¡ Clocks, broadcasting stations, etc. need to be set again.
Even if I insert a CD, the number of songs
is not displayed.
Try changing the length and orientation of
the whip antenna.
Wipe your fingerprints with a soft
cloth. If it is scratched, replace the
CD.
Are you using characters that cannot be
displayed on this machine (Hiragana, Kanji, etc.)?
Try changing the orientation and
position of the AM loop antenna.
twenty three
Dew on the lens may be present.
Wait about 1 hour before using.
52
Make sure that the amount of data in one
session is about 5MB (about 2 songs for
about 3 minutes) or more.
7,
23
Insert with the label side up.
13
The session was terminated
twenty three
C
P
3
M
D
57 57
Memory reset (initialization)
When needed
RQT6953
Reference page
Machine Translated by Google
To Next Page
Loading...
