To Next PageTo Next Page
Need help?Do you have a question about the Panasonic RX-S35 and is the answer not in the manual?
General| Brand | Panasonic |
|---|---|
| Model | RX-S35 |
| Category | Cassette Player |
| Language | English |
Compares parts between original and West German models.
Covers power, dimensions, and weight of the cassette player.
Details FM/AM frequency ranges, intermediate frequencies, and sensitivity.
Lists frequency response, tape speed, and track system.
Identifies and numbers various controls and components on the device.
Covers removal of cassette panel, front cabinet, and mechanism.
Instructions for removing the dial chassis and circuit board.
Explains the rationale behind component updates and revisions.
Details specific part number changes and interchangeability.
Essential steps to perform before commencing alignment procedures.
Step-by-step guide for aligning the AM radio section.
Step-by-step guide for aligning the FM radio section.
Covers channel separation, audio levels, and tape speed calibration.
Explains the meaning of symbols used in circuit diagrams.
Specific IF and RF adjustments for the AM radio section.
Specific IF and RF adjustments for the FM radio section.
Procedures for audio channel separation and tape speed calibration.
Shows the electrical connections between components and ICs.
Lists part numbers for integrated circuits, transistors, diodes, and passive components.
General guidelines for performing alignment procedures.
Detailed steps for adjusting the AM radio frequency and IF stages.
Detailed steps for adjusting the FM radio frequency and IF stages.
Illustrates the overall signal path through the device's main blocks.
Detailed view of the printed circuit board showing component placement.
Lists part numbers for resistors, capacitors, and other electronic components.
Procedures for aligning signal separation and audio output levels.
Diagrams showing the physical arrangement of mechanical components.
Identifies specific part numbers for mechanical assemblies and components.
Lists key mechanical performance metrics like pressure and torque.
Locates and identifies various parts of the device's cabinet.
Lists part numbers for cabinet components and accessories.
Lists items included with the product and packaging materials.
