Panasonic S-12MT2U6 - Page 71

Design of 3WAY VRF SYSTEM
2 - 55
1
2
3
4
5
6
7
8
9
There are 4 types of solenoid valve kits: type 456,
656, 856 and type 4160. The corresponding indoor
unit model capacities are shown in the table at right.
●
Solenoid Valve Kit
CZ-P456HR2U
CZ-P656HR2U
CZ-P856HR2U
CZ-P4160HR2U
No. of port
4
6
8
4
Indoor Unit Capacity
per 1 port
Type 18 or under
Type 54 or under
A
B (Suspension bolt pitch)
C
D
E
F
G（SUCTION）
H（DISCHARGE）
J（LIQUID）
Type 456
36-3/16 (919)
34-13/32 (874)
31-49/64 (807)
2-41/64 (67)
4-29/64 (113)
8-25/64 (213)
2-1/64 (51)
2-1/64 (51)
4-39/64 (117)
Type 656
51-1/16 (1297)
49-21/64 (1253)
46-21/32 (1185)
2-1/8 (54)
2-11/64 (55)
4-17/32 (115)
Type 856
65-15/16 (1675)
64-7/32 (1631)
61-17/32 (1563)
2-3/32 (53)
2-3/32 (53)
4-17/32 (115)
Type 4160
36-3/16 (919)
34-13/32 (874)
31-49/64 (807)
8-5/32 (207)
2-11/64 (55)
2-1/8 (54)
4-29/64 (113)
Unit : in. (mm)
C
B (Suspension bolt pitch)
A
5-25/32 (147)5-25/32 (147)
**F
3-13/16 (97)
8-25/64 (213)*
2-41/64 (67)
1-11/32 (34)1-11/32 (34)
DEDEDED
5-19/32 (142)
2-7/16 (62)2-7/16 (62)
23 - 21/32 (601) 18 - 25/32 (477)
(Suspension bolt pitch)
J（LIQUID） H（DISCHARGE） G（SUCTION） G（SUCTION） H（DISCHARGE） J（LIQUID）
AA
BB
Right sideLeft side
1-7/32 × 15/32 hole
(31× 12)
(For suspension bolt)
(4 Position)
In case of right side connection.*
Including the protection tubes when
connecting to the left side.
**
8-4-3. Valve Dimensions and Hanging Method
8. Optional Parts
TD831183-00_北米向け3WAY.indb 55 15/12/17 16:05:25