Panasonic S-36MK2E5A - Page 98

Mini VRF SYSTEM
Outdoor Unit Maintenance Remote Controller
4 - 10
4
Display of unit No. 1 (main unit)
RemarksDescriptionDN
°C
°C
°C
°C
°C
°C
°C
°C
°C
°C
°C
°C
Indoor unit intake temp. (TA)
Indoor unit heat exchanger temp. E1 (E1)
—
Indoor unit heat exchanger temp. E3 (E3) Indoor unit
Discharge air temp. (BL)
Discharge air temp. setting
Indoor unit MOV pulse (MOV) STEP
Discharge temp. (DISCH)
High-pressure sensor temp.
Heat exchanger gas (EXG)
Heat exchanger liquid (EXL)
Outdoor air temp. (TO)
Inverter secondary current
A
A
Inverter primary current (L2 phase) (Three phase only)
A
A
Outdoor unit
STEPMOV pulse 1 (MOV1)
—
—
Inverter actual operating frequency
Inverter primary current (L1 phase)
Low-pressure sensor temp.
Suction temp. (SCT)
Temp. sensor at refrigerant gas outlet of dual-tube temp. (SCG)
High-pressure
Low-pressure
°C
MPa
MPa
Inverter primary current (L3 phase) (Three phase only)
Hz
Sub cooler (MOV4) STEP
NOTE
0A and subsequent items are outdoor unit data.
It takes about 10-second long until outdoor unit data appears or changes on the display.
SM830228-013WAYECO-iSYSTEM.in1010 2013/07/
4. Monitoring Operations
SM830258-01_欧州向け_1fan_mini_VRF.indb 10 18/02/09 11:17:43