Panasonic S-36PF1U6 - Page 193

1-1851-184
1. Specifications
7-19. Self-diagnostics Table and Detected Contents
60LQGE 
The “Alarm Display” shown in the table below expresses the alarm contents displayed when the
wired remote controller is connected. For how to handle the alarms, see installation instructions
of indoor units or technical guide.
Detected contents Indication lamp on the receiver
Alarm Display
OPERATIONTIMERSTANDBY
Blinking
Communication error in the remote
controller circuit
Communication error either in the in/
outdoor operation line or the sub-bus of
the outdoor unit
Operation of indoor protection device
Alternately
Operation of outdoor protection device Alternately
Alternately
Alternately
Simultaneously
F30, F31 Simultaneously
Simultaneously
Simultaneously
conditioner
A01-A31
Simultaneously
Inconsistency in Cooling/Heating (Including an auto-temp
setting for a model without auto-temp settings)
Alternately
Oil alarm (Same as operation of outdoor protection device) Alternately
Test operation Simultaneously
: OFF : ON (Illuminated) : Blinking (0.5 seconds interval)
Emergency
operation button
Emergency
operation button
OPERATION
lamp
OPERATION lamp
TIMER
lamp
TIMERlamp
STANDBY
lamp
STANDBY lamp
Light receiving
section
Light receiving
section
1
SM830203-04.indb 185 15/10/16 10:45:23