4
Page
IMPORTANT ....................................................................................2 7. HOW TO INSTALL WIRELESS REMOTE CONTROLLER
RECEIVER ................................................................................24
Please Read Before Starting
1. GENERAL ...................................................................................5
NOTE
1-1. Tools Required for Installation (not supplied) Refer to the Operating Instructions attached to the optional
Wireless Remote Controller Receiver.
1-2. Accessories Supplied with Unit
1-3. Type of Copper Tube and Insulation Material
1-4. Additional Materials Required for Installation
8. APPENDIX ................................................................................24
Q Troubleshooting
2. SELECTING THE INSTALLATION SITE ...................................6
Q Tips for Energy Saving
2-1. Indoor Unit
3. SELECTING THE LOCATION FOR THE INDOOR UNIT ..........7
3-1. Required Minimum Space for Installation and Service
3-2. Suspending the Indoor Unit
3-3. Installing the Drain Pipe
3-4. Connecting Duct to Indoor Unit
3-5. External Static Pressure Setting for Dc Fan Motor Model
3-6. External Static Pressure Setting for AC Fan Motor Model
4. ELECTRICAL WIRING .................................................................. 18
4-1. General Precautions on Wiring
4-2. Recommended Wire Length and Wire Diameter for Power
Supply System
4-3. Wiring System Diagrams
5. HOW TO PROCESS TUBING ..................................................22
5-1. Connecting the Refrigerant Tubing
5-2. Connecting Tubing Between Indoor and Outdoor Units
5-3. Insulating the Refrigerant Tubing
5-4. Taping the Tubes
5-5. Finishing the Installation
6. HOW TO INSTALL THE TIMER REMOTE CONTROLLER
(OPTIONAL PART) ...................................................................24
NOTE
Refer to the Operating Instructions attached to the optional Timer
Remote Control Unit.
To Next Page
Loading...
