8. Press “ REC/STOP” button. (Tape will not move)
9. Press “ TUNE MODE” button to indicate Error Code. (Error Code
is displayed for DECK1 when DECK selector is switched to
DECK1 and display for DECK2 when it is switched to DECK2)
10. Press “TAPE, DECK1/2” button to select DECK1.
11. Repeate step 2 to 9 to test DECK1. (Tape Deck1 will not check
H02 because of no recording function)
CD Mechanism Test / (F15, F16, F17, F26, F27, F28, F29, H15)
1. Press “CD” button.
2. Press “CD Manager” button.
3. Press “ /TUNE MODE” button to indicate Error Code.
To clear all Error Code
1. Press “ /TUNE MODE” button
2. FL will display “CLEAR” for 1 second and changer to “T”.
How to cancel Self-Diagnostic Function
1. Press “POWER” button OFF.
Power Amplifier Failure (F61)
1. When power amplifier fail, F61 will be displayed automatically.
11. Description of Error Code
11.1. Error Detection for Cassette Mechanism block
53
To Next Page
Loading...
Need help?
General
