4 Accessories
Remote Control
Transmitter
AC power supply cord
FM indoor antenna
AM Loop antenna
Power plug
adaptor
• •
No sound is heard when the power is turned on.
• •
Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
"shorted", or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
Note : Refer to Packing Materials & Accessories for part number.
3
SA-AK78
To Next Page
Loading...
