Panasonic SA-DK20

No. Error Display Error Explanation Cause (IC number, etc.)
56 F702 Message Command Changed System component bug → IC6201
57 F880 Task number not relevant System component bug → IC6201
58 F890 Attempted to send message while sending to an AV
task (mailbox overflow, etc.)
System component bug → IC6201
59 F891 Couldn’t send message to AV task (mailbox
overflow, etc.)
System component bug → IC6201
60 F8A0 Message command is not relevant System component bug → IC6201
61 F893 Flash ROM is interpolated IC6302
62 F894 EEPROM is not normal IC6303
No. Error Display Error Explanation Cause (IC number,etc.)
1 U11 Focus servo error
2 H01 Tray loading error
3 H02 Spindle server error
DSC disc motor error
6626 CLVS FAILURE
4 H03 Traverse motor error
5 H04 Tracking server error
6 H05 SEEK timeout error
8.3. Additional Functions
8.3.1. Tray Lock Function
•
There are two tray lock functions
•
Power on through the SELECTOR /DVD/CD. While holding down the [CD STOP] button on the main unit press the [POWER]
button on the main unit or the remote control. Lock Mode A will be entered, [_ _ _ _LOCKED_ _] will be displayed for 3 seconds,
and the current disc will begin playing.
•
Lock Mode A will disable the button below while turning the power on or off.
[OPEN/CLOSE]
•
When locked in Lock Mode A pressing the [POWER] button on the main unit or the remote control while holding down the [CD
STOP] button on the main unit will display [_ _UNLOCKED_ _] and unlock the unit.
•
Power on through the SELECTOR DVD/CD. While holding down the [CD PLAY] button on the main unit press the [POWER]
button on the main unit or the remote control. Lock Mode B will be entered, [_ _ _LOCKED_ _] will be displayed for 3 seconds,
and the current disc will begin playing.
•
In Lock Mode B the button below, mainly selector and disc operation related items, will be disabled.
Main Unit: [DISC 1] ~ [DISC 5] [OPEN/CLOSE] [DISPLAY/DEMO] [CLOCK/TIMER] [T.PLAY/REC] [SELECTOR] [STOP]
[TUNER/BAND] [TAPE < >] [I<</<<] [>>/>>I] [PAUSE] [TAPE EJECT] [REV MODE] [REC/STOP]
Remote Control: [SLEEP] [AUTO OFF] [DIMMER] [MIX 2ch] [MUTING] [0] ~ [9] [>=10] [DISC]
[RETURN] [DISPLAY] [TEST] [CH SELECT] [TUNER/BAND] [TAPE < >] [SELECTOR] [REPEAT]
[MARKER] [STOP] [PAUSE] [I<<] [>>I] [<<] [>>]
[KARAOKE ON/OFF] [KARAOKE DISP] [KARAOKE MODE] [ONE TOUCH] [ECHO]
[KEYCON b] [KEYCON #] [MIC -] [MIC +] [SETUP]
While playing it is not necessary to re-disable buttons disabled under Lock Mode B.
Also, button related to sound quality are not disabled. The buttons below are not disabled.
Main Unit: [POWER] [CD MANAGER] [AMAZING] [DVD/CD] [CINEMA] [DPL] [SSS]
Remote Control: [POWER] [SET UP] [PLAY MODE] [CLEAR] [EQ] [3D AI] [SUPER W] [VOL -] [VOL +]
[DVD/CD >] [MENU] [TOP MENU] [<] [>] [^] [v] [ENTER]
[SUB TITLE] [AUDIO] [ANGLE]
•
When locked in Lock Mode B pressing the [POWER] button on the main unit or the remote control while holding down the [CD
PLAY] button on the main unit will unlock the unit after displaying [_ _UNLOCKED_ _] for 3 seconds.
•
Tray lock is canceled when AC power is cut.
•
Tray lock A and B functions are exclusive operations. The first one enabled will have priority.
•
When a disabled button is pressed while in lock mode [_ _ _LOCKED_ _] will be displayed for 3 seconds on the front display
panel.
•
Lock mode will be cancelled when a loading error occurs with the CR20.
(If the [OPEN/CLOSE] button were disabled when the tray is opened by a TAKE OUT DISC error recovery would be impossible)
12
SA-DK20