Panasonic SA-DK20

9.2.1. Disassembly for the disc tray
ornament
• Follow the (Step 1) - (Step 3) of item 8.1
When opening the disc tray automatically
Step 1
Connect the power.
Step 2
Push the button and the power turns ON.
Step 3
Push the open/close button, so the disc tray will be
open automatically. (If the other buttons would be push, disc
tray would be open.)
Step 4
Disconnect the power.
Step 5
Release the 2 claws, and then remove the disc tray
ornament.
Step 6
Connect the power again.
Step 7
Push the button and the power turns ON.
Step 8
Push the open/close button1, so the disc tray will be
close.
When opening the disc tray manually
Step 1
Upset the unit.
Step 2
Insert the gear for servicing into the bottom hole of
mechanism unit cover, and then rotate the hexagonal wrench
clockwise so the disc tray will be open.
9.2. Disassembly for DVD/CD changer unit
19
SA-DK20