Panasonic SA-HT540E - Service Position Guidelines

Note: Refer to the diagrams of Power P.C.B. (Section 19.2) for
location of the parts.
Caution: Be careful when removing the Switch Regulator
IC which has high temperature after prolonged use.
10.16. Service Position
10.16.1. Servicing position of the DVD
Module P.C.B.
· Follow the Item 10.7.
· Follow the (Step 1) of Item 10.8.
· Follow the (Step 1) - (Step 2) of Item 10.9.
Step 1 Connect FFC cables at connectors. (CN2006, CN2007)
Step 2 Turn Mechanism unit to vertically position.
10.16.2. Servicing position of the Main
P.C.B.
· Follow the Item 10.7.
· Follow the (Step 1) of Item 10.8.
· Follow the (Step 1) - (Step 2) of Item 10.9.
Step 1 Connect FFC cables at connectors. (CN2006 &
CN2007)
Step 2 Turn Main P.C.B to vertically position.
31
SA-HT540E / SA-HT540EB / SA-HT540EG