Step 1 : Remove all the FFC (CN805, CN1, CP6251, CN1304 and CN101).
Step 2 : Remove the DVD F/E Module loading unit.
Step 3 : Detach DSP P.C.B. while removing tab on board holder.
Step 4 : Position the DVD F/E Module loading unit as diagram shown above.
Step 5 : Reconnect back all the FFC (CN805, CN1, CP6251, CN1304 and CN101).
- Carry out checks with DVD REG P.C.B. in the condition as
To Next Page
Loading...
