[Caution]
1. Apply compound grease (RFKX0002 or equivalent heat
dissipating compound) on the rear face of the power IC when
attaching Power IC.
2. Tighten adequately the 3 screws after replacement of Power IC.
3. Use the offset screwdriver for tightening and loosening of screws.
12.7. Replacement of DVD Traverse Unit
* Repeat Step 1 to 3 of item 12.1
* Repeat Step 1 to 7 of item 12.2
* Repeat Step 1 to 3 of item 12.3
Step 1 : Detach all the FFC (FP3202, FP3203, FP4202, FP5201 and CN1).
Step 2 : Remove all the screws.
Step 3 : Remove Top Plate.
To Next Page
Loading...
