Panasonic SA-HT650P - Things to Do After Repair

disc will begin playing.
2. Lock mode B primarily controls the selector and disc operations,
and disenables for the following keys.
Note:
OPEN/CLOSE button are invalid and the player displays “___LOCKED_” while the lock
function mode is entered.
- Prohibiting operation of selector and disk
1. Select the DVD/CD function.
2. Press and hold down the button on the player and the power
button on the remote controller unit for at least three seconds.
(The message, “___LOCKED_” appearswhen the function is
activated.)
Note:
The following buttons are invalid and the player displays “___LOCKED_” while the lock
function mode is entered.
14.8. Things to Do After Repair
Follow the procedure described below after repair.
1. While the power is on, press the button to close the tray.
2. Press the power button to turn off the power.
3. Unplug the power cable.
Note:
It is prohibited to unplug the power cable while the tray is opened and to close the tray
manually.
15. Adjustment Procedure
15.1. Required Tools and Equipment