Panasonic SA-HT800VP - Page 19

Display
Meaning
Automatic
display
Memory
F15 No capstan FG when cassette is loaded(Capstan
system, S-reel system failure)
X O
H16 Cylinder lock detected during normal rotation X O
H17 S-reel lock detected during normal running O O
H18 T-reel lock detected during normal running O O
H80 EJECT mode when an error is detected X O
F2* Error during PG automatic adjustment O O
10.1.2. Service Mode
<Service Mode and Service Data>
Number
Details Meaning at Minute Position (Service
Data 1)
Meaning of Second Position
(Service Data 2)
0 Service data VCR mode (real time) Processing number (real time)
Deck mode Treatment during mechanism
transition Control number
1 Service data Starting/End terminal detect
information
Reception key information
Displayed
only
the
reception
key
is
ON.
00 : Detection of neither starting or
end terminal 01 : Detecting starting
terminal 02 : Detecting end terminal
03 : Detecting both starting and end
terminals
When the unit key or remote
controller unit is used, the
reception code is displayed.
2 Service data Mechanical position (real time) Motor command (real time)
Because
the
mechanical
operation
available
without
tape,
mode
accepts
starting
terminal
detection
No
detection
No
judgment
tape
and
position
detection
0L : EJECT position 02 : DOWN
positions 03 : R-REW positions 04 :
LOAD positions 05 : REV positions
06 : PLAY positions 07 : POFF
positions 08 : STOP positions 09 :
STOP positions 0- : FFREW
positions 0_ : Middle of positions
0*, 2* : CYL off Cap off 1* :
CYL off Cap on (fwd) 3* : CYL
off Cap ON (rev) 8*, U* : CYL
on Cap off 9* : CYL on Cap on
(fwd) A* : CYL on Cap ON (rev)
*0 : Moter off *1 : Loading *2 :
Un Loading *3 : Break (Load +
Unload)
19