Number
Details Meaning at Minute Position (Service
Data 1)
Meaning of Second Position
(Service Data 2)
3 Self diagnosis
history (1st
time)
Error code of History 1 Additional information 1 and 2
of History 1
4 Self diagnosis
history (2nd
time)
Error code of History 2 Additional information 1 and 2
of History 2
5 Self diagnosis
history (3rd
time)
Error code of History 3 Additional information 1 and 2
of History 3
6 Service data Cylinder ON command Cap motor ON/OFF and
forward/reverse rotation
command
as
of
7 Manual operation Real timeMechanical position Real timeMotor command
Same as the details of Service 2 Same as the details of Service
2
10.1.3. Service Mode Display
<Overview>
A part of the microcomputer internal information is displayed on the FIP in order to ease
servicing during sales.
<Setting>
Press and hold down the FF and EJECT buttons for at least three seconds to enter the service
mode. As this operation is repeated, service number changes starting at 0 up to 7, and then
counter (clock) is displayed.
<Display>
FIP display example:
20
To Next Page
Loading...
