Panasonic SA-HT800VP - Page 22

When no error code is memorized, "-" will appear as error code and additional data.
10.1.5. Self-Diagnosis History Memory
<Overview>
The self-diagnosis history memory function stores up to three errors historically, which of each
occurs consecutively, and also additional data such as deck mode and mechanism position
along with error code for the purpose of speedy solution of a problem.
<Error code and additional data>
Following table shows additional data applicable to error code.
Error
code
Meaning Additional data
Data 1 Data 2 Data 3
01 No initialization of cylinder due to no
loading (Cylinder, driving circuit failure, etc.)
VCR
mode
- Tape
position
02 No capstan FG at load position (Capstan,
driving circuit, etc. failure)
VCR
mode
- Tape
position
FG
03 Mechanism locking not because of
unloading, cassette up
VCR
mode
Standby position Tape
position
information
04 Mechanism locking due to unloading VCR
mode
- Tape
position
information
05 No S-reel pulse due to unloading (S-reel
system, capstan system failure)
VCR
mode
Tape position Tape
position
information
06 Mechanism locking due to cassette up VCR
mode
Standby position Tape
position
information
07 Recording circuit operation failure during
REC operation
VCR
mode
- Tape
position
08 Recording circuit operation failure not
during REC operation
VCR
mode
- Tape
position
11 Detection of head clogging-ups VCR
mode
- Tape
position
15 No S-reel pulse when cassette is loaded
(Capstan system, S-reel system failure)
VCR
mode
S-reel pulse
counting value
Tape
position
16 Cylinder lock detected during normal
rotation
VCR
mode
Processing number Tape
position
17 S-reel lock detected during normal running VCR
mode
Processing number Tape
position
FG
18 T-reel lock detected during normal running VCR
mode
Processing number Tape
position
FG
80 EJECT mode when an error is detected VCR
mode
*1 Tape
position
2* Error during PG automatic adjustment VCR
mode
- Tape
position
<Meaning of Additional data, (Data 1), VCR mode)
22