<Additional data 3> (Mechanical process transition NO)
(EJECT) (P ON)
10 : PLAY REV passing11 : REV
passing12 : REV passing LOAD (Capstan
stop)13 : LOAD DOWN14 : DOWN
EJECT15 : EJECT completed
None displayed: Power ON treatment
(P OFF)
70 : PLAY P OFF
(FF) (REW)
U0 : PLAY STOP FU1 : STOP F FFU2 :
FF initialization
A0 : PLAY STOP FA1 : STOP F REWA2 :
REW initialization
(PLAY) (STILL)
20 : Cylinder initialization, phase drawing21 :
Audio mute, W switch
40 : Forward rotation, REC signal off41 :
Speed 0, Capstan Off
(REC)
(STILL PLAY)
30 : Cylinder initialization, phase drawing31 :
REC signal output
48 : Tape forwarding
(CUE PLAY)
(REV)
4A : End terminal check, tape forwarding4- :
PLAY check, tape forwarding
80 : PLAY P OFF81 : Rewind82 : P OFF
REV
(CUE)
49 : Double speed forwarding, remaining
computation jump
<Additional data 4> (LM information)
By loading motor driving request
No change in mechanical position: 1 (loading motor OFF)
Some change in mechanical position: 2 (loading motor ON)
24
To Next Page
Loading...
