Panasonic SA-HT920P - Page 20

l Follow the (Step 1) - (Step 4) of Item 11.2.
l
Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1
Remove 2 screws.
Step 2
Release 4 claws at Tray Motor P.C.B. and Sensor P.C.B.
11.9 Removal of the CD Traverse Unit
l Follow the (Step 1) - (Step 2) of Item 11.1.
l Follow the (Step 1) - (Step 4) of Item 11.2.
l Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1
Rotate cam gear anti-clockwise. (Align at position (A) as marking on gear with arrow)
Step 2
Flip the base mecha unit in vertical position.
Step 3
Press upward (a), push backward (b) and press to left (c) to release CD traverse unit.
11.10 Removal of the Pulley Gear
l Follow the (Step 1) - (Step 2) of Item 11.1.
l Follow the (Step 1) - (Step 4) of Item 11.2.
l
Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1
Remove of the loading belt.