Step 3 : Replace the IC (IC 2002) accordingly base on table 1 below.
Note:
l The above mention part number is for purpose of identifying the version of Main P.C.B. before repair.
l The correct part must be use with the correct version of Main P.C.B. (Refer to Table 1.)
l The following section (section 2 to 4) illustrate the changes.
l The electrical part list change between the original & revise.
27.2 Printed Circuit Board Diagram (Revise)
27.2.1 Main P.C.B (SA-HT920P/PC)
l With reference to page 56 (section 21) for original service manual as mentioned models.
l
The below Main P.C.B. applies to RJBX0388A-5 & RJBX0388B & above only. The P.C.B. part no. (complete
P.C.B. with parts) remains unchanged.
27.3 Schematic Diagram (Revise)
27.3.1 Schematic Diagram (SA-HT920P/PC)
l With reference to the schematic diagram of original service manual. This section illustrate the comparison between
the original (for RJBX0388A-4 & below) & new (for RJBX0388A-5 or RJBX0388B & above).
l Schematic Diagram -6
l Scale location is A-1
Applied Model
IC2002 Part No
Main P.C.B. compatible
SA-
RJBX0388A-4 & below [M]
RJBX0388A-
[M]
Table 1
To Next Page
Loading...
