Step 3: Insert a flathead screwdriver into the groove of the front
panel as shown. Ensure that the screwdriver is above the small
steel rule.
Step 4: At the boss area, push up to open the bosses as arrow
shown.
Caution:
Do not exert strong force as it may damage front panel.
2.4. Disassembly of Piezzo
ornament
Follow (step 1) in item 2.2.
Follow (step 1) to (step 4) in item 2.3.
Step 1: Remove 2 screws.
Step 2: Insert the steel rule in between the piezzo ornament
and rear cabinet as arrow shown.
6
SB-PM54GN
To Next Page
Loading...
