Panasonic SB-HEP20

Operating Instructions
Model No. / Modèle SB-HEP20
RQT5886-Y
Speaker System
Before connecting, operating or adjusting this product, please read
these instructions completely.
Please keep this manual for future reference.
Il est recommandé de lire attentivement le présent manuel avant
d’utiliser l’appareil.
Conserver ce manuel.
Manuel d’utilisation
Enceintes acoustiques
PP

Panasonic SB-HEP20 Specifications

Speaker System Specifications

type	2 way 2 speaker system
woofer size	10 cm
tweeter size	6 cm
impedance	6 Ω
input power	200 W
sound pressure level	80 dB/W
crossover frequency	4 kHz
frequency range	70 Hz – 50 kHz

Weight and Dimensions

dimensions	129 x 324 x 173 mm
mass	2.7 kg

Summary

Speaker set-up

Attach the rubber feet to the speaker

Guides on attaching rubber feet to speakers for stability and to prevent movement.

Attaching the surround speakers to the wall

Instructions for mounting surround speakers vertically or horizontally on a wall.

Location

Guidelines for optimal speaker placement relative to the listening position and stability.

Connections

Instructions for correctly connecting speaker cables to the receiver or amplifier.

Notes

Speaker impedance and allowed input

Details on speaker impedance and maximum allowed input power for safe operation.

Protection circuitry

Explanation of the protection circuitry and troubleshooting for sound interruption.

Excessive input

Warnings and advice on avoiding damage from distorted sound at high levels.

Other notes

Important considerations for use near televisions and handling of speakers.

Maintenance

Cleaning instructions

Guidance on how to clean the speaker units using appropriate cloths and solutions.

Product service

Information on where to refer for product service and repairs.

Specifications

Technical specifications

Detailed technical data including impedance, power, frequency response, and dimensions.