- 14 -
4 Start the Internet browser on the device to display the settings
page.
≥ [iOS] : The settings page will be automatically displayed.
≥ [Except_iOS] : Open the Internet browser and refresh the page to display the
settings page.
– If the settings page is not displayed, type “http://172.19.42.1/” into the
URL address field.
5 Type a device name and then select “Next”.
≥ The device name will be displayed as this unit’s name on the network.
≥ The guaranteed limit is 32 characters.
≥ The device name is set when “Next” is selected.
≥ You can also change the device name after the network connection is set
up. (l 19)
To Next Page
Loading...
