14
RQT9655
Specifications
∫ GENERAL ∫ AMPLIFIER SECTION
∫ SPEAKER SYSTEM SECTION
∫ Wi-Fi / AirPlay SECTION
∫ TERMINAL SECTION
≥ Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital
spectrum analyzer.
General
Main set rating
DC 12 V, 20 W
System
Power consumption
(With USB port charging)
Approx. 22 W
Power consumption in standby mode
(When “NET STANDBY” is “OFF”)
Approx. 0.15 W
Power consumption in standby mode
(When “NET STANDBY” is “ON”)
Approx. 3.7 W
AC Adaptor
Input
AC 100 V to 240 V, 50/60 Hz
Output
DC 12 V, 3 A
Dimensions (WkHkD)
430 mmk128 mmk59 mm
(16
15
/16qk5
1
/32qk2
5
/16q)
Mass (Weight)
Approx. 1 kg (2.2 lbs)
Operating temperature range
0 oCtor40 oC(r32
o
F to r104
o
F)
Operating humidity range
20 % to 80 % RH (no condensation)
Output power:
RMS Output Power Stereo mode
Front Ch (both ch driven)
5 W per channel (6 ≠),1kHz,10%THD
Total RMS Stereo mode power
10 W
FTC Output Power Stereo mode
Front Ch (both ch driven)
3.5 W per channel (6 ≠),
60 Hz to 20 kHz, 1 % THD
Total FTC Stereo mode power
7W
Type
1 way, 1 speaker system (Bass Reflex)
Speaker unit(s)
Full range
4cm(1
9
/16q) Cone typek2
Impedance 6 ≠
Wi-Fi
WLAN Standards
IEEE802.11b/g
Frequency range
2.4 GHz band
Security
WEP, WPA
TM
, WPA2
TM
WPS version
Version 2.0 (WEP not support)
USB Port
USB port power
DC OUT 5 V, 2.1 A Max (charging only)
SC-AP01PPC~RQT9655.book 14 ページ ２０１２年３月２日 金曜日 午後７時５７分
To Next Page
Loading...
