33
Advanced operations
VQT5F59
Secure the speaker.
Using the tie down area on the rear of the speaker
and a cord (not supplied), secure the speaker to a
wall anchor (not supplied) permanently attached
to the wall.
1 Thread a cord to the speaker.
≥ Use a cord of less than ‰ 2.0 mm, which is
capable of supporting over 10 kg.
e.g., [BTT465] Front speaker
A Cord (not supplied)
2 Thread a cord from the wall to the speaker
and tie tightly.
B Wall anchor (not supplied)
C Wall or pillar
D Approx.150 mm
E Approx.100 mm
To prevent tipping/falling of
the speakers
When mounted on a wall
When placed on the floor
SC-BTT465&405&105EB-VQT5F59_mst.book 33 ページ ２０１４年１月２４日 金曜日 午後３時４４分
To Next Page
Loading...
