13
Getting started
VQT3Z99
∫ To position speakers horizontally
1 Remove the bracket (A).
2 Detach the speaker stand.
≥ Pull out the speaker cable from the stand.
3 Attach the cushion foot (supplied) (B) on
the bottom of the speaker.
≥ Place the speakers facing the inclined surface
(C) toward outside.
≥ To attach speaker stand again
1
Secure the cable with the speaker (
D
), and put
the speaker cable through the speaker stand.
2 Put the speaker and the stand together,
and then attach the bracket (A).
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
[BTT282] Assembling the front speakers
Slide the speaker
cable into the groove.
SC-BTT282&182EB-VQTVQT3Z99_mst.book 13 ページ ２０１２年２月８日 水曜日 午前１１時８分
To Next Page