EasyManua.ls Logo

Panasonic SC-BTT282 - Specifications

Panasonic SC-BTT282
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
VQT3Z99
Specifications
* The impedance of all the speakers is 3 ≠.
* This unit supports “HDAVI Control 5” function.
Specifications are subject to change without notice.
GENERAL
Power consumption:
[BTT282]
89 W
[BTT182]
80 W
Power consumption in
standby mode: Approx. 0.1 W
Power supply: AC 220 V to 240 V, 50 Hz
[BT T282]
iPod/iPhone Connector:
DC OUT 5 V 1.0 A MAX
Dimensions (WkHkD):
[BTT282]
430 mm
k
38 mm
k
279 mm
[BTT182]
430 mm
k
47 mm
k
263 mm
Mass:
[BTT282]
Approx. 2.7 kg
[BTT182]
Approx. 2.4 kg
Operating temperature
range: 0 oC to 40 oC
Operating humidity range: 35 % to 80 % RH
(no condensation)
AMPLIFIER SECTION
RMS TTL POWER OUTPUT:
520 W
1 kHz, 10 % total harmonic distortion
FRONT: 160 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER: 200 W per ch (3 ≠)
Audio Input
AUX k 1
Digital Audio Input
Optical k 1
[BTT282] HDMI AV input k 2
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: PCM, Dolby Digital, DTS
FM TUNER SECTION
Frequency range: 87.50 MHz to 108.00 MHz (50 kHz
step)
Antenna terminals:
75 ≠ (unbalanced)
SPEAKER SECTION
Woofer
CONE TYPE
(cm)
Full range
CONE TYPE
(cm)
[BTT282]
Front j
6.5
Subwoofer
16
j
[BTT182]
Front j
6.5
Subwoofer
16
j
Dimensions
(W (mm)
k
H (mm)
k
D (mm))
Mass
(Approx. kg)
[BTT282]
Front 109 k341 k110 0.79
Subwoofer 145 k289.5 k258 3.0
[BTT182]
Front 80 k139 k71 0.37
Subwoofer 145 k289.5 k258 3.0
TERMINAL SECTION
USB slot: USB2.0: 2 system
SD card slot: Connector: 1 system
Ethernet: 10BASE-T/100BASE-TX 1 system
[BTT282]
Wireless LAN:
Standard Compliance:
IEEE802.11 b/g/n
Frequency range: 2.4 GHz band
Security: WPA
TM
/WPA2
TM
(Encryption
Type: TKIP/AES, Authentication Type:
PSK), WEP (64 bit/128 bit)
VIDEO SECTION
Signal system: PAL/NTSC
[BTT282] Video output
Output level: 1.0 Vp-p (75 ≠)
Output connector:
Pin jack (1 system)
HDMI AV output*
Output connector:
Type A (19 pin)
[BTT282] HDMI AV Input*
Input connector:
Type A (19 pin) 2 system
LASER Specification
Class 1 LASER Product
Wave length:
790 nm (CDs)/660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous radiation is emitted
with the safety protection
SC-BTT282&182EB-VQTVQT3Z99_mst.book 48 ページ 2012年2月8日 水曜日 午前11時8分