52
VQT4Z41
Specifications
* The impedance of all the speakers is 3 ≠.
GENERAL
Power
consumption
Approx. 80 W
Power
consumption in
standby mode
Approx. 0.1 W
Power supply AC 220 V to 240 V, 50 Hz/60 Hz
Dimensions
(WkHkD)
460 mm
k
47.7 mm
k
265.4 mm
Mass Approx. 2.4 kg
Operating temperature
range
0 oC to 40 oC
Operating humidity
range
35 % to 80 % RH (no condensation)
LASER
Specification
Class 1 LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the safety
protection
AMPLIFIER SECTION
RMS TTL POWER
OUTPUT
1000 W
1 kHz, 10 % total harmonic distortion
FRONT:
CENTRE:
SURROUND:
160 W per ch (3 ≠)
160 W per ch (3 ≠)
160 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER:
200 W per ch (3 ≠)
Audio Input AUX k 1
Digital Audio Input Optical k 1
Sampling frequency:
32 kHz, 44.1 kHz, 48 kHz
Audio Format:
PCM, Dolby Digital, DTS
SPEAKER SECTION
Front Full range 6.5 cm CONE TYPE k 2
Super
tweeter
Piezo type
Centre Full range 6.5 cm CONE TYPE
Super
tweeter
Piezo type k 2
Surround Full range 6.5 cm CONE TYPE k 2
Super
tweeter
Piezo type
Subwoofer Woofer 20 cm CONE TYPE
Dimensions
(W (mm)
k
H (mm)
k
D (mm))
Mass
(Approx. kg)
Front
Speaker with the base stand (high position)
157.8 k 544.5 k 156.3 1.5
Centre 280 k 84.4 k 72.5 0.65
Surround
Speaker with the base stand (high position)
157.8 k 544.5 k 156.3 1.5
Subwoofer 232 k 406 k 316 5.7
SC-BTT430GA-VQT4Z41_mst.book 52 ページ ２０１３年３月１８日 月曜日 午後１２時３分
To Next Page
Loading...
