Panasonic SC-BTT430 - STEP 2: Preparing the Speakers

13
Getting started
VQT4Z41
STEP 2: Preparing the speakers
Front speakers, Surround speakers
1 Attach the base stand.
2 Tighten the 2 screws (supplied) securely.
3 Thread the speaker cable through the
base stand.
4 Slide the speaker cable into the groove.
5 Attach the speaker cable sticker (supplied)
and connect the speaker cables to the
speakers. (> 14)
≥ After connecting the speaker cable, press the
cable into the groove.

≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Assembling the speakers
For high position
The height of the front and
surround speakers can be
adjusted.
For low position
Groove
SC-BTT430GA-VQT4Z41_mst.book 13 ページ ２０１３年３月１８日 月曜日 午後１２時３分