Panasonic SC-CH55 - Listening to Radio Broadcasts; Manual tuner operation; MW allocation

Listening to Radio Broadcasts
Manual tuner operation
(to listen to broadcasts by using the jog dial)
Have you switched on the power?
1 Press the input select button marked
“TUNER”.
2 Press the band-select button to select the
desired band (FM/MW/LW).
Received band Received frequencies
3 Turn the jog dial so as to tune to the desired
broadcast.
If the FM stereo broadcasts is received, the FM stereo indi-
cator will illuminate.
—28—
@ MW allocation
When the band select button is pressed for about 3 seconds, the
MW frequency step will change to 9 or 10 kHz per step.
In order to return to the original frequency indication, press this
button for about 3 seconds again.
OE tn TTT SS EY Om tn