Do you have a question about the Panasonic SC-CH52 and is the answer not in the manual?
rated minimum sine wave RMS power output | 25 W (4Q) |
---|---|
total harmonic distortion | 10% |
input sensitivity AUX | 250 mV |
track system | 4 track, 2 channel |
---|---|
tape speed | 4.8 cm/sec |
wow and flutter | 0.1% (WRMS) |
type | 1 way closed |
---|---|
full range speaker cone type | 12 cm |
input power | 12 W (music) |
frequency range | 87.5~108.0 MHz |
---|---|
sensitivity | 23.3 dBE |
stereo separation at 1 kHz | 31 dB |
sampling frequency | 44, .1kHz |
---|---|
decoding | 16 bit linear |
beam source/wave length | semiconductor laser/780 nm |
power consumption | 43 W |
---|---|
power supply | AC 230-240 V, 50 Hz |
load impedance | 4Q |
dimensions (WxHxD) | 270x345x308.5 mm |
---|---|
weight | 6 kg |
dimensions (WxHxD) 2 | 201.5x345x192 mm |
Important safety guidelines for using the stereo system.
How to install, use, and replace remote control batteries.
Step-by-step guide to saving favorite radio stations.
How to create a custom playback sequence using the remote.
Setting up the deck and selecting radio bands for recording.
Steps to start, stop, and interrupt radio broadcasts recording.
Inserting tape and preparing for recording from CDs.
Initiating and stopping the recording process from CDs.
Programming specific tracks from CDs for recording.
Inserting tapes and selecting recording modes for tape duplication.
Initiating and stopping the tape-to-tape recording process.
Connecting and playing audio from external devices.
Steps for recording audio from connected external units.
Procedures for cleaning tape heads and capstan shafts.
Solutions for common problems like no sound or reversed channels.
Addressing issues with FM reception noise and signal quality.
Solutions for problems like beat sounds and hum during AM reception.
Technical details for amplifier, speaker, and tuner sections.