Panasonic SC-CH55 - Memory tuner operation; If noise is excessive in the FM mode; From the remote control; Most recent memory

Listening
to
Radio
Broadcast
cennes
FM MODE/B.P
Memory tuner operation
Oc
OOOO
COO0d
et
(to listen to broadcast stations preset into memory)
Have you switched on the power, and performed
the steps of “Memory presetting’’ on page 29?
@ From the main unit
1 Press the band-select button to select the
desired band (FM/MW/LW).
Each time you press the band-select button, FM/MW and LW
indicator will be alternately displayed.
2 Press the tuning mode button to select
“PRESET”.
3 Turn the jog dial to select the desired preset
channel.
The selected preset channel will iiuminate
mal\en
_— tL (LS ne
ha
fi
—~30—
Bf If noise is excessive in the FM mode
Press the FM mode/beat proof button to monaural
position.
The “FM stereo” indicator will go out.
The sound will then be heard in monaural and the FM stereo
indicator will not illuminate; If the broadcast signal is weak, or if
there is a large amount of interference, sounds can be heard more
clearly.
@ From the remote control
1 Press the band-select button to select desired
band (FM/MW/LW).
2 Press the preset-tuning button to select the
desired preset channel.
@ Most recent memory
The most recent memory system “remembers” the broadcast sta-
tion last tuned to when the power is switched to standby mode or
other functions are selected. The last tuned station will be heard
when the unit is switched “ON” or the tuner function is selected.
Memory presetting’s is maintained for as long as approximately 2
weeks even in the condition the power cord is disconnected.
I i NR RN NE BE a tS a es