External unit
Enjoying audio from iPod or iPhone
g Inserting an iPod/iPhone
Press [;, iPod] to open the sliding door.
Insert the suitable dock adapter (not included) for the
iPod/iPhone.
g Removing an iPod/iPhone
Press [;, iPod] to close the sliding door.
Repeat step and (➡ left).
To remove, simply pull the iPod/iPhone straight out to
disconnect it.
Repeat step and (➡ left).
If the iPod/iPhone dock is not tilted when connecting or
disconnecting the iPod/iPhone, it may cause damage to the
connector.
When inserting an iPod/iPhone into the unit, be sure to use
the dock adapter either supplied with the iPod/iPhone or
commercially available from Apple Inc.
Reduce the volume of the main unit to minimum before
connecting or disconnecting the iPod/iPhone.
•
•
•
Notes on iPhone:
All phone features can only be controlled by the iPhone’s
touch screen.
The unit does not display incoming calls or the phone status
(Connect iPhone to this unit via Bluetooth (➡ page 19) to
enjoy extended capabilities).
The ringtone of incoming call can be heard from the iPhone’s
speaker. When the unit is in iPod/iPhone mode, the ringtone
can also be heard from the unit’s speakers (Connect iPhone
to this unit via Bluetooth (➡ page 19) to enjoy extended
capabilities).
Connecting or disconnecting the iPhone from the unit will not
cancel a call.
There is no Apple Inc. specification that will guarantee the
iPhone responses above. iPhone responses may vary on
new iPhone models or iPhone new software updates.
•
•
•
•
•
Play
Press [iPod q/h].
Pause
Press [iPod q/h] or [g, ].
Skip track
Press [u] or [i].
Search the current
track
Press and hold [u] or [i].
Display iPod/iPhone
menu/return to previous
menu
Press [iPod MENU] in the play
mode.
(Remote control only)
Select contents from
iPod/iPhone menu
Press [e,r] and then [OK].
(Remote control only)
Connect the iPod/iPhone
(not included) firmly.
Be sure to remove the iPod/iPhone
from its case.
Push the docking switch
lever back until it clicks
into place.
Push!
Click!
Press [;] to unlock the
iPod/iPhone dock and
then pull the docking
switch lever to tilt the
iPod/iPhone dock.
Click!
Dock adapter
Lever
Connector
Clips
Insert the side of the
iPod/iPhone dock
adapter with the
clips facing towards
you first and then
push the opposite
side until it clicks into
place.
[;]
To Next Page
Loading...
