To Next PageTo Next PageWhy is my Panasonic SC-HT500 Home Theater System not turning on?
To address the issue of no power on your Panasonic Home Theater System, ensure that the AC mains lead and system cable are securely inserted. Also, check if the unit was switched to standby by the sleep timer.
What causes distorted sound on a Panasonic SC-HT500 Home Theater System?
If you are experiencing distorted sound with your Panasonic Home Theater System, try turning the volume up or muting off. If this does not solve the problem, switch off the unit, determine and correct the cause, then switch the unit back on. Also, check for shorting (bare wires touching) of positive and negative speaker wires. Avoid using speakers with an impedance lower than that rated for this unit or straining the speakers through excessive volume or power. Ensure the unit is not in a hot environment without proper ventilation.
What to do if Panasonic Home Theater System display is dark or shows error messages?
If your Panasonic Home Theater System display is dark, press and hold the [–DIMMER] button to brighten it. If you see “NO PLAY” or “NO DISC”, ensure you have inserted a disc that the unit can play and that it is inserted correctly. If you see “F61”, “DVD U11” or “ERROR”, check and correct the speaker cord connections. If that doesn't work, there may be a power supply problem, so consult a dealer. For a dirty disc, wipe it clean. If you see “DVD H??” followed by a number, read the instructions and try again. As a general troubleshooting step, try resetting the unit by switching it to standby mode and then back on, or by disconnecting and reconnecting the AC mains lead. If service numbers fail to clear, contact a qualified service person.
How to fix noise issues on Panasonic SC-HT500?
If you're experiencing noise or distorted sound with your Panasonic Home Theater System, or if “ST” flickers or doesn’t light, adjust the position of the FM or AM antenna. Consider using an outdoor antenna. Turn off the television or separate it from the unit. Also, separate the antenna from other cables and cords.
How do I enable on-screen display on my Panasonic SC-HT500 Home Theater System?
To display on-screen messages on your Panasonic Home Theater System, go to Display in the SETUP menus and select 'On' for 'On-Screen Messages'. If the GUI screen is not fully displayed, press [3, 4] while the rightmost icon is highlighted to move them down. To change the language of the disc’s menu, go to Disc in the SETUP menus and select the preferred language for 'Menus'.
Why is my Panasonic SC-HT500 Home Theater System humming?
To resolve humming during play on your Panasonic Home Theater System, keep other appliances and cords away from the subwoofer, especially AC mains leads or fluorescent lights.
General| Type | Home Theater System |
|---|---|
| Speaker Configuration | 5.1 Channel |
| Number of Speakers | 5 |
| DVD Player | Yes |
| USB Port | Yes |
| Bluetooth | No |
| Dimensions (Main Unit) | 430 x 64 x 300 mm |
| Weight (Main Unit) | 3.3 kg |
| Channels | 5.1 |
| Subwoofer | Yes |
| Remote Control | Yes |
| Playable File Formats | MP3, WMA |
| Radio | FM |
Essential warnings and cautions for safe operation and handling of the unit.
Step-by-step guide for safely replacing the fuse in the AC mains plug.
Details on disc types supported and unsupported by the unit.
Guidance on locating and positioning speakers for optimal sound effect.
Detailed instructions on connecting speaker wires to the unit and speakers.
How to connect the unit to a TV using the VIDEO IN terminal.
Instructions for connecting to TVs with SCART or S-VIDEO IN terminals.
How to connect the AM loop, FM indoor antennas, and the AC mains lead.
Instructions on installing batteries in the remote control.
Instructions for mounting speakers onto a wall securely.
Step-by-step guide for initial configuration using the QUICK SETUP screen.
How to set TV Type and TV Aspect for optimal display.
Detailed explanation of each button on the remote control.
Overview of buttons and indicators on the main unit and subwoofer.
Steps to load a disc and begin playback.
Information on playing sources with Dolby Digital and DTS audio formats.
How to activate Dolby Pro Logic and adjust speaker levels for optimal surround.
Solutions for issues related to power, unit response, and remote control.
Troubleshooting distorted sound, humming, and playback errors.
Important safety guidelines for using the product safely.
Detailed technical specifications for the amplifier and speaker components.
