6
≥ Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn the television off before connecting, and refer to the television’s operating instructions.
To improve picture quality, you can change the video signal output from the SCART (AV) terminal.
Select “RGB/No Output” from QUICK SETUP (➜ page 10).
≥ This connection will also enable you to play audio from your television through your home theater system.
Refer to “Operating other equipment” (➜ page 37, Operations Guide).
Connecting to a television with SCART (AV) terminal
STEP4 Audio and video connections
P
B
P
R
Y
INTERLACE)
(PROGRESSIVE/
COMPONENT VIDEO OUT
VIDEO
OUT
r
s
S-VIDEO
OUT
R
L
AUX
AV
Television
(not included)
Back of the main unit
Sound from the television
Press [EXT-IN] to select the “TV” audio input
on the remote control (➜ page 37, Operations
Guide).
Scart cable (not included)
≥ To listen to the sound from the
television, select the appropriate audio
out (e.g., Monitor) on the television.
EB-setup guide.fm Page 6 Friday, March 10, 2006 11:53 AM
To Next Page
Loading...
