9
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 0.5 W). To save power when the unit
is not to be used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the unit.
[Note]
The included AC mains lead is for use with this unit only. Do not use it with other equipment. Also, do not use cords for
other equipment with this unit.
STEP5 Radio and AC mains lead connections
Adhesive tape
To household
mains socket
(AC 230
–240 V,
50 Hz)
AC mains lead
Main unit
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other
wires and cables.
Click!
AM loop antenna FM indoor antenna AC mains lead
FM indoor antenna
Affix this end of the antenna
where reception is best.
≥ Connect the AC mains lead after all other connections are complete.
≥ Using an outdoor antenna (optional) (➜ page 33, Operations Guide).
Re-tighten
the terminal
screw.
Loosen the terminal
screw with a Phillips-
head screwdriver.
White
Red
Black
While pushing, insert the wire fully.
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 IN
OPERATIONS GUIDE BEFORE CONNECTION.
EB-setup guide.fm Page 9 Friday, March 10, 2006 11:43 AM
To Next Page
Loading...
