Panasonic SC-HT540 - Connecting the System to Your Television; SCART (AV) Terminal Connection for TV; Selecting TV Audio Input

RQT8722
Simple Setup
10
≥Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn the television off before connecting, and refer to the television’s operating instructions.
To improve picture quality, you can change the video signal output from the SCART (AV) terminal.
Select “RGB/No Output” from QUICK SETUP (➜ page 14).
≥This connection will also enable you to play audio from your television through your home theater system.
Refer to “Operating other equipment” (➜ page 37).
Connecting to a television with SCART (AV) terminal
STEP4 Audio and video connections
P B
P R
Y
INTERLACE)
(PROGRESSIVE/
COMPONENT VIDEO OUT
VIDEO
VIDEO
OUT
OUT
r
s
S-VIDEO
S-VIDEO
OUT
OUT
R
L
AUX
AUX
AV
Television
(not included)
Back of the main unit
Scart cable (not included)
≥To listen to the sound from the
television, select the appropriate audio
out (e.g., Monitor) on the television.
Sound from the television
Press [EXT-IN] to select the “TV” audio input
on the remote control (➜ page 37).
Audio and video connections
8722En_p06-17.fm Page 10 Thursday, March 9, 2006 11:05 PM