Panasonic SC-HT80 - Disc Position Marking; Marking and Recalling Playback Positions

Other methods of play
A Marking a position Remote control only
€S!IiKvcE)CCD3
This feature allows you to mark a specific point on a disc so you
can return to it easily at a later time. There are five markers
available.
It only works if the elapsed playing time of the disc you are playing
, is shown on the unit’s display.
1 Press [SHIFT]+[TITLE, MARKER]
during play.
The marker display appears.
2 Press [SELECT] at the point you want
to mark.
up to five markers can be stored.
I
ii^+ □
V t MARKER
To mark another position
3 © Press [<]] or [[>] to change
markers.
@ Press [SELECT].
j^jj Recalling a marked position
1 Press [SHIFT]+[TITLE, MARKER]
during play.
The marker display appears.
2 Press [<]] or [|>] to highlight the
required marker.
3 Press [UP/ON ^] to recall the
position.
To clear a marker
® Press (SHirn+rriTLE, MARKER],
(D Press (<]] Of ([>] *0 highlight the marker you want to clear and
press [CLEAR],
Press [SHIFT|+[TITLE, MARKER] to clear the marker display.
• This feature can not be used with some DVDs or with video CDs
with PBC.
page 50)
• Some subtitles may fail to appear around the marker (DVD).
• Markers are cleared when the unit is turned off or the disc is
removed or changed.
<^[>
20
UP/ON
ROT5235