Panasonic SC-HT80 - Speaker Level Adjustment; Adjusting Speaker Levels for Dolby

Sound field
1
2
rr c cTt i I7T7^
V , I u _ \ I L- i < y
VOLUME
c
I I f
LJ t-
> (n I Tr\
< U U X< y
3
UP/ON
Z\
Remote control only
Adjusting Dolby Digital and Dolby Pro Logic
If the level of the speakers appears to be different while listening to
a source, sit where you would normally and perform the following to
adjust the level of all the speakers to the same apparent level.
The speaker levels can be adjusted within the following
ranges:
L, R; -16dBto0dB
C, RS, LS, S: -10dBto+6dB
SW (Subwoofer): -10dBto+10dB
Preparations:
To adjust Dolby Digitai
Press [DVD/CD].
To adjust Dolby Pro Logic
Press [DOPRO LOGIC].
1 Press [TEST] to output a test signal.
The test signal is output in the following order.
DOLBY DIGITAL
L: Front speaker (left)
C: Center speaker
R: Front speaker (right)
RS: Surround speaker (right)
LS; Surround speaker (left)
^ No signal is output for the subwoofer.
Dolby Pro Logic
L: Front speaker (left)
C: Center speaker
R: Front Speaker (right)
S; Surround speaker
No signal is output for the subwoofer.
2 Press [VOLUME (+ or -)] to set the
volume level normally used for
enjoying the source.
3 Press [UP/ON z\ ] or [DOWN/OFF \7]
to adjust the level of each speaker to
the same apparent level.
In Dolby Pro Logic, only the center (C) and surround (S)
channels can be adjusted.
To stop the test signal
Press [TEST].
To adjust speaker level during play
1. Press [CH SELECT] to select the speaker channel.
In Dolby Digital
L C R — RS — LS — SW (Subwoofer)
t_I
The subwoofer (SW) cannot be selected If it is off.
(^ page 40)
In Dolby Pro Logic
C — S
t_I
2. Press [UP/ON Z^] or {DOWN/OFF ^].
I
35
RQT523S
Sound
qualify/sound
field
operations