Panasonic SC-HT80 - Remote Control Code Management; Changing Remote Control Codes

Changing the remote control code
Change the remote control code in either of the following circumstances:
• If the Panasonic TV or VCR does not operate as a result of a difference in the remote control code.
• It you wish to operate some other make of TV or VCR.
QOS
Even after changing the code there may be cases where certain operations cannot be done or operation is not possible at all.
■ a
WHO tnaMmU lY-voto
O'o o o
■ .kTiTOii agi caa q,
O O O
wsc I qgcj
© @ @
0<fiC4 OKC! _ VOLUME
S) S) © fn
©
How to change the remote control code
o o
♦
© ® ®
® ® ®
® ® ®
®
♦
® ® ®
® © ®
® ® ®
®
Hold down the button corresponding to the
component you wish to operate.
Continue to hold the button down and...
Aim the remote control at the component you wish
to operate and carefully and slowly press the
numbered buttons to enter the appropriate two-digit
code number.
(Refer to the table below for the code number.)
When the two-digit code number is entered, the remote control will
automatically output the on/off signal.
If the remote control has been correctly changed to the code for the
component to be operated, the component will be switched ON or OFF.
If there is more than one code number indicated in the code table,
repeat the above procedure until you find a code number for which the
power of the component is switched ON or OFF.
1 TV_1
1 VCR 1
Manufacturer Code No.
Manufacturer Code No.
Manufacturer
1 Code No.
Manufacturer Code No.
Panasonic 01 , 02
RCA
03, 07,13
RCA
03, 04, 08, 09,
10, 11, 12, 23,
24, 26
Sony
04 Sanyo 14 Sony
G-E
03, 09, 13
Sharp
06, 08, 21
Fisher
Gold Star 06, 07, 15, 20,
Sylvan ia 07, 11, 15 Funai
Sanyo 18
22 Symphonic
17, 23
G-E 08, 11 !
Sharp
16, 17
Hitachi 05, 06, 07 Toshiba
10 Gold Star 27 1
Shintom 32
JVC 12
Zenith 18 Hitachi 10,11 ;
Symphonic 30
LXI 07, 11, 13, 14, JVC 19
Toshiba
23, 24
15
LXI 10, 13, 15, 18,
27
20
Magnavox
06, 07, 11, 15
Mitsubishi 07, 15, 16
Magnavox 08,09,12
NEC
07. 15
Mitsubishi 21,22,28,29
Philco 06, 07, 11 NEC 19, 25, 31
Philips 11 Philco 08, 09
Pioneer
19
Philips 08,09,12
Quasar 01,02, 09 Quasar 01,02,08,09
• This remote control can operate televisions and videos only.
• Some models cannot be operated by this remote control.
• To prevent accidental operation, press [DVD/CD] after operation so the unit is ready to operate this unit.
43
RQT5235
Other
functions