Panasonic SC-HT850 - Simple Setup: Speaker Assembly; Assembling Speaker Units

5
RQT7026
Simple setup
Simple setup
≥You can attach the speakers directly to their bases (if you want to put them on shelves, for example).
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i) terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
Caution
Hold the speakers by the sides. Applying pressure to the front net can damage the speaker.
STEP
1
Assembly and connection of front and surround speakers
2
3
4
31
2
5
8
7
_:
`:
4
15
_:
`:
6
1
2
4 Speaker units 4 Stands
4 Bases
Speaker cables
≥2k4-m cables
≥2k10-m cables
8 Silver screws
Fit into groove. Place into groove.
Position wire
in grooves as
necessary
avoiding
knots.
Fit into groove.
Place into groove.
Confirm screw
is securely
fastened.
Confirm screw
is securely
fastened.
Approx.
120 mm
Copper
Silver
Assembled
Copper
Silver
7026en.book5ページ２００３年２月１７日 月曜日 午後３時３０分