8
RQT0B25
1 Turn the main unit on or off (> 18)
2 Select the input source (> 18)
“TV” (-# “BLUETOOTH”
3 Select the setup menu (> 21)
4 Select the sound menu (> 19)
5 Select the Bluetooth
®
device as the source
(> 18)
6 Adjust the volume of this system (> 18)
7 Mute the sound (> 18)
8 Select and confirm the option
∫ About remote control signal sensor
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30
o
left and right
B Remote control signal sensor for table top layout
C Remote control signal sensor for wall mounting layout
Remote control
SOUND
MUSIC
1
5
6
7
8
2
INPUT
SETUP
OK
3
4
∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark
facing upward.
For table top layout
For wall mounting layout
SC-HTB385_EGEB_RQT0B25-B.book 8 ページ ２０１６年３月２９日 火曜日 午前９時３３分
To Next Page
Loading...
