RQT0B25
9
Getting started
Step 1 Connections
≥Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are completed.
A Optical digital audio cable (supplied for Continental Europe only)
≥ When you use the optical digital audio cable, insert the tip correctly into the terminal.
≥OPTICAL DIGITAL AUDIO IN (TV) terminal is compatible with PCM. Change “DIGITAL AUDIO
OUTPUT” setting to “PCM” on the TV. Read the operating instructions for the TV for details.
≥ Connect only after all other connections are completed.
B To a household mains socket
C AC mains lead (supplied)
≥
This system consumes a small amount of AC power (
>
26) even when it is turned off. In the interest of power
conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
Connection with the TV
AC mains lead connection
OPTICAL
OUT
TV
OPTICAL
DIGITAL
AUDIO IN
A
Saving energy
The main unit is designed to conserve its power consumption and save energy.
≥
The main unit will automatically switch to standby mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page 21, “AUTO POWER DOWN” to turn this function off.
SC-HTB385_EGEB_RQT0B25-B.book 9 ページ ２０１６年３月２９日 火曜日 午前９時３３分
To Next Page
Loading...
Need help?
General
